Rain damaging siding for residential, wind, snow, while providing effective protection against external weather conditions such as sun, but also is used to complete the building's architectural style aesthetic. Siding voice transmission while minimizing heat and prolongs the life of the building by providing waterproofing.
Coating materials are usually selected according to the building's design and aesthetic and uygulanır.türkiye predominantly wooden, precast, american siding, siding coatings, composites (alucobont), granite, aluminum, natural stone and glass cladding is used, the USA, Canada exterior and companies in countries such as Australia widely (depending on thermal conditions) with wood siding, siding, siding american are used.
EXTERIOR SIDING HOW (insulation)
Plinth Profile Application: according to the sheet thickness of the coating to be used to determine the size of sub profiles. A spirit level with the wall profile is adjusted to form a smooth line and is determined by the fixing.
Adhesion of coatings Sheet: Prepared adhesive sheet is applied to the outer surface of the bottom frame method and staggered so that there is space starting (brick syntax) is placed. Birleştitg adhesive sheets must be taken to overflow at the edges.
Dowelling coating of the plate: Wind and plastic dowels are used as mechanical fasteners to prevent the effects of turbulence. Number plate type dowels to be used is determined by the weather conditions and building features and applied. Dowels exterior middle of the facing plates and other plates confluence applied in correspondence with the joints.
Edges and corners Applications: Edges and corners of rest should have maximum mechanical stress and impact protection. Protect this region and aluminum mesh to reduce the risk of cracking or plastilin corner profiles should be used.
Mesh Surface Application: The coating is applied on the plate with plaster trowel. Reinforcement mesh should not be embedded into the fresh plaster and plaster kurumamışk. To avoid possible cracks in the overlay should be applied over the net addition of 10 cm each place. The thickness of the applied plaster should be 3-4 mm in two layers.
Topcoat Decorative Plating: The first coat of plaster stucco textured topcoat application can be made after it dries completely. The favorable weather conditions to be applied in rainy weather will lose its material properties are recommended. The sufficient number of elements must be applied to break quickly.
Exterior Paint Application: Application in exterior paint brush in two coats should be applied to the front roller or spray.
We encourage you to watch our informative video for detailed visual information about the siding.
EXTERIOR FEATURES OF TILES
- The atmosphere is resistant to chemical attack,
- Maintaining the harmful effects of the sun's rays,
- Temperature differences will occur due to damage from expansion and contraction,
- Maintaining and water getting into the waters of precipitation,
- Don spoil the effect,
- Internally not prevent them from escaping and from the inner surface of the steam generated will need to have basic facilities like.
As well as materials of these features are related to the physical structure to form the visible side of the building, with an aesthetically tissue properties are expected to be qualified to complement the building.
Siding material is handled in basically five groups in terms of implementation.
- Exterior Plasters
- Detected plate to adhesive coatings Dossier
- Natural and artificial stone plates
- Prefabricated panels Wallcoverings
- Facades
Apply the old siding is usually made in the construction of housing for the manufacturing stage both laborious and costly. The most popular of the building siding can be done later, rapid applicability and exterior sheathing and siding applications are exterior coatings for economic reasons. Both exterior coating system also provides both heat and waterproofing maintain their strength for many years and they complement the aesthetics of our living space.
